Electric Corner Dryer For Glb0047/cn-48/cn-49/cn-50/cn, 6 Kw, 1400 M³/ Hour, Virtus Z/CDCB
- Afmetingen:
82x87x177 cm
- Made In:
Italië
- Vermogen (ELEK):
6,6 kW
- Voltage:
~400 V
- Levering:
Palletvervoer
It uses air at 70°C, withdrawn from the outside and heated by a 6 kW heat exchanger (optional 9 kW). A 550 W radial turbo fan sends a fl ow of 1.400 m³/ hour to two upper outlets. the air blades also have the effect of maintaining the steam inside the machine; drying is installed on a cantilever-mounted module with length of 820 mm. the use of dry air at a relatively low temperature allows to treat even the most delicate glasses or plastic materials safely, which would risk melting if dried in a conventional dryer.
Krachtig 400 volt apparaat
Dit product heeft een krachtstroom aansluiting.
Specificaties
Algemeen
- Artikelnummer (SKU)
- VT-Z/CDCB
- MPN
- Z/CDCB
- Merk
- Virtus
- Garantie
- 12 maanden
- Garantievoorwaarden
- Garantie op onderdelen, Installatie door erkend installateur noodzakelijk
Afmeting, Inhoud, Gewicht en Capaciteit
- Model
- Inbouwmodel
- Breedte
- 82 cm
- Diepte
- 88 cm
- Hoogte
- 178 cm
- Gewicht
- 80 kg
- Bruto gewicht
- 90 kg
Energie en Milieu
- Uitvoering
- Elektrisch
- Extra elektrische informatie
- 380-415 V, 6,000+0,550 kW electric, 50 Hz, 3F+N fase
- Vermogen (Elektrisch)
- 6,55 kW
- Vermogen (Totaal)
- 6,55 kW
- Voltage
- ~400 V
- Frequentie (Hz)
- 50 Hz (Netfrequentie)
- Netspanning
- AC 400V 3F+N 50Hz: Krachtstroom
- De behaalde temperatuur kan iets variëren, afhankelijk van omgevingsfactoren.Temperatuurbereik tot
- +70 °C
Overige Kenmerken
- Gemaakt in
- Italië
Leverancier en Fulfillment
- Type Transport
- Palletvervoer
Codes & Compliance
- Leverancier SKU
- Z/CDCB
- HS Code
- 84229010
Extra productinformatie
- Eigenschappen
- It uses air at 70°C, withdrawn from the outside and heated by a 6 kW heat exchanger (optional 9 kW). A 550 W radial turbo fan sends a fl ow of 1.400 m³/ hour to two upper outlets. the air blades also have the effect of maintaining the steam inside the machine; drying is installed on a cantilever-mounted module with length of 820 mm. the use of dry air at a relatively low temperature allows to treat even the most delicate glasses or plastic materials safely, which would risk melting if dried in a conventional dryer.